1000 miles and the engine started going bad. Then noticed parts that had bean either badly fitted and fitted incorrectly. Inlet manifold leaking. Letting oil run down the back of the block, into the bell housing and contaminating the clutch. Due to not been skimmed. Core plug placed wrong way around. Crank thrust bearing bad. This was noticed when there was 37thou play in the flywheel when they should be 5thou. Phoenixengine.com no longer reply to messages. There customer service should read. No customer service as for photos. The file seems to be too large to be able to down load them but I will put them on face book.