" DO NOT BUY"
I BOUGH A FRONT END CONTROL ARM KIT FOR A 2005 GMC SIERRA, after installing the lower control arms, the right side was jammed with the knuckle and the outer tip of the lower control arm. Next to lower tie rod, I order this about a month ago and because of a very busy schedule, I finally got to work on the truck after a month. I got them for a 2004 GMC Sierra, 1500, 4X4. The knuckle would not turn because there was no clearance. The arm is about 1/8 or more, longer than the original one. Another bad thing is that, the grease nipple is located right at the center of the lower tie rod, on the upper position, and to be able to grease the joint, the axle has to be removed for access. I had to grind the outer tip of the right lower control arm, about 1/8 of and inch to be able to make work, in the process of removing the part for the second time, the grease boot for the lower tie rod, got damaged and the grease spilled.
I tried calling the Yita company and a recording answered, the 4 times I called, and a message answered " WE ARE NOT AVAILABLE RIGHT NOW, PLEASE CALL BACK SOME TIME" WHAT EVER THAT MEANS.